YONGKANG YUELON ELECTRONIC EQUIPMENT CO.,LTD
Home > Medium Frequency MF Series > MF-45

MF-45

Medium Frequency Series

inquiry
  • Specifications
    Model MF-45
    Max. input power 45KW
    Max. input current 68A (min. 100A 3phase circuit breaker required)
    Power cord Cross Section mm2/per wire (copper core): 16mm2
    Output frequency 1-20KHz
    Output current 15-95A
    Output voltage 70-550V
    Input voltage 380V 3-phase, 50/60Hz (custom make avaialble upon request)
    Duty cycle 100% (24hours continuous working)
    Heating timer 1-99 Sec.
    Retaining timer 1-99 Sec.
    Power supply cooling water desire

    ≥ 0.2 Mpa ≥4L/min

    Whole system cooling water desire ≥ 0.2 Mpa ≥10L/min
    Generator size (L x W x H) 650 x 350 x 550mm
    Generator N.W. 47KG
  • Description

    Induction heating generator main characteristics

    With IGBT module power components and current inverting control technology, and parallel oscillating circuit is used.

    Wide frequency range from 1KHZ to 20KHZ, it is easy to match the machine according to the parts and heating desire.

    Due to the parallel oscillating structure, it is easy to get the best matching of the machine to get high heating efficiency and full power output of generator.

    Due to the high technologies of inverting control, soft and accurate switching control is realized to assure the high reliability and low repair of the machine.

    Small size , compared with SCR controlled induction heating machine, only 1/10 working space is needed, greatly reduce occupation space.

    High efficiency and energy saving, a high power factor and power efficiency within the scope of full power.

    With wide frequency range from 1-20KHZ automatic tracking ability, no need adjustment at scene.

    100% duty cycle , 24hours continuous working ability at maximum power.

    Constant output voltage or power control modes are alternative;

    Full display of output power, output frequency, output voltage and current。

    Simple operation, operate can be learned in a few minutes.

    Simple installation: connect the machine to 3phase 380VAC and cooling water only.

    Timer can be chosen to preset and adjusted the heating time, heating power, retaining time, retaining power respectively to control the heating curve and heating temperature.

    Advantages and applications of models with timer function

    Heating power, retaining power, heating time, retaining time can be preset and adjusted, this makes it possible to control the heating curve and heating temperature.

    It is suitable to use in the repeated heating or high speed heating of small parts.

    By presetting the timer and the power of the generator, retaining can be realized to a certain extent.

  • Application

    Medium frequency induction heating machines are usually used in the penetration heating occasions, for example, Rod heating for forging

    Melting of almost all kinds of metals

    Heating of stators or rotors for fitting

    Heating of tube end for extrusion

    Heating of moulds

    Deep quenching of shafts and gears

    Tempering or preheating of weld joint and so on .

  • Customer comments