-
Specifications
Model UF-30AB Max input power 30KW Max. input current 45A Heating current 7-70A Working frequency 80-200KHz Input voltage 380 VAC 3phase, 50/60Hz Duty cycle 100% Auto timers 0.1-99.9 seconds Water pressure ≥ 0.2 Mpa Water flow ≥6L/min Water temperature <40°C size Generator: 520x260x450mm Transformer 400x260x370mm Net weight Generator: 29 kg Transformer 24kg Packing size 710x660x760mm Packing weight 91kg -
Main Characteristic
With high frequency up to 200KHZ , and very thin and tiny parts can be easily heated.
IGBT and current inverting technologies have been used; higher reliability and lower maintenance cost.
100% duty cycle, continuous working is allowed at maximum power output.
Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
Display of heating power and heating current and oscillating frequency.
Simple to install , installation can be done by unprofessional person very easily;
Light weight, small size;
Different shape and size of induction coil can be changed easily to heat different parts.
Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.
-
Main Applications
Heat treatment of gear and shaft
Steel and stainless steel screw coating
Annealing of wires and rods.
etc.
-
Customer comments
Induction Heaters CatalogHigh Frequency SeriesSuperaudio Frequency SeriesUltrahigh Frequency SeriesMedium Frequency MF SeriesMedium Frequency MFS Series DSP Full Digital Induction Heating MachinesInduction Melting FurnaceHorizontal Continuous Casting MachineInduction Forging FurnaceInduction Hardening MachineInduction Brazing MachineMotorcycle Wheel Hub Brake Ring Heating MachineELectric Motor Induction HeatersMobile Handheld Induction HeatersHigh Frequency Tube WeldersWater Cooling system
UF-30AB
Ultrahigh Frequency Series
