Home > Ultrahigh Frequency Series > UF-20AB


Ultrahigh Frequency Series

  • Specifications
    Model UF-20AB
    Max input power 20KW
    Max. input current 30A
    Heating current 5-45A
    Working frequency 80-250KHz
    Input voltage 380 VAC 3phase, 50/60Hz
    Duty cycle 100%
    Auto timers 0.1-99.9 seconds
    Water pressure ≥ 0.2 Mpa
    Water flow ≥6L/min
    Water temperature <40°C
    size Generator: 520x260x450mm
    Transformer 400x260x370mm
    Net weight Generator: 28 kg
    Transformer 16kg
    Packing size 710x660x760mm
    Packing weight 88kg
  • Main Characteristics

    With high frequency up to 250KHZ , and very thin and tiny parts can be easily heated.

    IGBT and current inverting technologies have been used; higher reliability and lower maintenance cost.

    100% duty cycle, continuous working is allowed at maximum power output.

    Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;

    Display of heating power and heating current and oscillating frequency.

    Simple to install , installation can be done by unprofessional person very easily;

    Light weight, small size;

    Different shape and size of induction coil can be changed easily to heat different parts.

    Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.

  • Main Applications

    Heat treatment of gear and shaft

    Steel and stainless steel screw coating

    Floating melt for institute or college research

    Tiny or powder material melting

    Copper joint brazing


  • Customer comments